Sling type pneumatic rubber fenders are light fenders which are easy to install and carry. They can be deflated and inflated as needed. They are greatly suitable for docks with large tidal variation and large vessels. The initial pressure of sling type pneumatic rubber fenders can be adjusted according to requirements.
The high-quality rubber materials ensure the sling type pneumatic rubber fenders are strong, robust and elastomeric. The main body of the sling type pneumatic rubber fenders is the rubber layer which is composed of three layers.
The sling type pneumatic rubber fenders can maintain large clearance between the vessel hull and the structures. This provide safety to both the facilities and the related people.
Usually, two chains will be enough for the installation of sling type pneumatic rubber fenders. On vessels, on chain will also work. So, the installation and maintenance of sling type pneumatic rubber fenders are pretty easy.
Sling Type Pneumatic Rubber Fenders Drawing and Dimensions:
| Fender size
D×L
(mm)
|
Initial pressure 0.5kg/cm2 |
Initial pressure 0.8kg/cm2 |
weight |
| Guaranteed energy absorption (GEA)
[kNm] |
Reaction force at GEA deflection
[kN] |
Hull pressure at GEA deflection
[kN/m2] |
Guaranteed energy absorption (GEA)
[kNm] |
Reaction force at GEA deflection
[kN] |
Hull pressure at GEA deflection
[kN/m2] |
Fender body
[kg] |
Chain & tire net
[kg] |
Total
[kg] |
| 700×1500 |
17 |
137 |
135 |
24 |
180 |
177 |
45 |
100 |
145 |
Features:
- Low hull pressure with large compression capacity
- Easy to be deflated and economical to store
- Maintain large clearances between hull and structure
- Suitable for small and large tidal ranges
- Easy and fast to deploy
Sling Type Pneumatic Rubber Fenders(4500×12000)