The size 1350×2500 of Yokohama fenders represents the fenders with the diameter of 1350mm and the length of 2500mm. This middle size of Yokohama fenders can almost be used for all kinds of docks and vessels. They are competent to carry out heavy duties.
Yokohama fenders are filled with air or hydrogen when working, and they are also called pneumatic fenders. They can float on the water, moving along with the rise and fall of the sea level. So Yokohama fenders are perfect solution for those docks with large tidal variations. They can also be used for ship to ship operation.
When packed for delivery, Yokohama fenders can be deflated. This can save a lot of space and money in delivery. The installation method of the Yokohama fenders is also very economical and efficient. Two chains are enough for the installation of a Yokohama fender. This installation method is suitable for Yokohama fenders for the flexibility and stability of the them can be ensured.
Yokohama Fenders Drawing and Dimensions:
| Fender size
D×L
(Mm)
|
Initial pressure 0.5kg/cm2 |
Initial pressure 0.8kg/cm2 |
weight |
| Guaranteed energy absorption (GEA)
[kNm] |
Reaction force at GEA deflection
[kN] |
Hull pressure at GEA deflection
[kN/m2] |
Guaranteed energy absorption (GEA)
[kNm] |
Reaction force at GEA deflection
[kN] |
Hull pressure at GEA deflection
[kN/m2] |
Fender body
[kg] |
Kette & tire net
[kg] |
Total
[kg] |
| 1350×2500 |
102 |
427 |
130 |
142 |
561 |
170 |
170 |
210 |
380 |
Funktionen:
- Easy and fast to deploy
- Low reaction force and reasonable reaction force even under excess load conditions
- Suitable for small and large tidal ranges
- Low hull pressure
- Suitable for inclined berthing
