The size 500×1000 of sling type pneumatic rubber fenders refer to the fenders with the diameter of 500mm and the length of 1000mm. This size is the smallest size of sling type pneumatic rubber fenders. To carry out different duties in different conditions, the initial pressure can be adjusted. They are the best solution for docks with large tidal variations.
The main body of sling type pneumatic rubber fenders is the rubber layer which is designed to be composed of three layers, including outer rubber, synthetic tire cord layer, and inner rubber. This special design for the rubber layer ensures the elastomer and strength of sling type pneumatic rubber fender.
Sling type pneumatic rubber fenders can be deflated on delivery and storage. This can help to reduce the space of storage and related costs. When they are put into work, they can be inflated to endure large compression. What’s more, the installation method of sling type pneumatic rubber fenders are pretty simple. Only two chains will work for the installation of one fender.
Sling Type Pneumatic Rubber Fenders Drawing and Dimensions:
| Fender size
D×L
(Mm)
|
Initial pressure 0.5kg/cm2 |
Initial pressure 0.8kg/cm2 |
weight |
| Guaranteed energy absorption (GEA)
[kNm] |
Reaction force at GEA deflection
[kN] |
Hull pressure at GEA deflection
[kN/m2] |
Guaranteed energy absorption (GEA)
[kNm] |
Reaction force at GEA deflection
[kN] |
Hull pressure at GEA deflection
[kN/m2] |
Fender body
[kg] |
Kette & tire net
[kg] |
Total
[kg] |
| 500×1000 |
6 |
64 |
132 |
8 |
85 |
174 |
25 |
55 |
80 |
Funktionen:
- Low hull pressure with large compression capacity
- Easy to be deflated and economical to store
- Suitable for small and large tidal ranges
- Easy and fast to deploy
- Maintain large clearances between hull and structure
