Yokohama fenders have been more and more popular these years. The size 1000×1500 of Yokohama fenders refer to the fenders with the diameter of 1000mm and the length of 1500mm. Yokohama fenders, also called pneumatic fenders, will usually be filled air or hydrogen when working. This makes the fenders able to endure large compression.
Yokohama fenders, designed with excellent performance, are manufactured with high-quality rubber material. The reinforced and elastomeric rubber material provide large energy absorption and low reaction force. On the outer surface, the Yokohama fenders can be equipped with protection layer to protect the fender body and prolong the lifespan of the fenders.
The installation of the Yokohama fenders is very easy. Just chains can almost satisfy the installation requirement. What’s more, the chain can also allow the fenders to float on the water along with the rise and fall of the sea level, remaining in the right place.
Yokohama Fenders Drawing and Dimensions:
| Fender size
D×L
(mm)
|
Initial pressure 0.5kg/cm2 |
Initial pressure 0.8kg/cm2 |
weight |
| Guaranteed energy absorption (GEA)
[kNm] |
Reaction force at GEA deflection
[kN] |
Hull pressure at GEA deflection
[kN/m2] |
Guaranteed energy absorption (GEA)
[kNm] |
Reaction force at GEA deflection
[kN] |
Hull pressure at GEA deflection
[kN/m2] |
Fender body
[kg] |
Chain & tire net
[kg] |
Total
[kg] |
| 1000×1500 |
32 |
182 |
122 |
45 |
239 |
160 |
60 |
110 |
170 |
Features:
- Low reaction force and reasonable reaction force even under excess load conditions
- Easy and fast to deploy
- Low hull pressure
- Suitable for inclined berthing
- Suitable for small and large tidal ranges
Sling Type Pneumatic Rubber Fenders(4500×12000)